Product Guide

Steel

Grade	Machinability	Heat Treatability	Cold Forming	Weldability	Cost Efficiency	Characteristics
A36						Good weldability. Good for general purpose uses where high strength is not required.
1018						Shafting quality. Soft and ductile.Good strength.
1045						Medium strength. Good forming properties. Great for shafts.
12L14						Fast machining. Good surface finish. Great for high production screw machine parts
1144		NA				No heat treating necessary. Minimum warpage on machining. Ecellent wear qualities and high hardness as received.

-Excellent

-Good

-Fair

-Poor

Aluminum

Grade	Machinability	Heat Treatability	Cold Forming	Weldability	Cost Efficiency	Characteristics
3003						Excellent workability, weldability, and resistance to corrosion
5052						One of the strongest non-heat-treatable alloys in common use. Excellentresistance to corrosion: especially in marine environments.
6061						Most versatile of the heat-treatable alloys. Combines relativley high strength, good workability, and high resistance to corrosion.

-Excellent

-Good

-Fair

-Poor

Stainless

Grade	Machinability	Heat Treatability	Cold Forming	Weldability	Cost Efficiency	Characteristics
303				NA		Free machining. User for screw machine parts.
304						Excellent strength, corrosion resistance, and cold forming properties.

-Excellent

-Good

-Fair

-Poor

This information is provided as a general guide to help you select the right product for your requirements. In no way is All Metals or www.net-safety.com.cn liable for any claims made. If doubt exists as to whether or not a certain material will perform to your requirements, please contact us.

Shop All Metals
Steel
- Steel Cold Rolled Flats
  - General purpose steel
  - Size tolerances more accurate than hot rolled
- Steel 1018 Cold Rolled Rounds
  - General purpose steel
  - Size tolerances more accurate than hot rolled
- Steel 1045 TG&P Cold Rolled Rounds
  - Extreme size accuracy
  - Surface is ground to ensure straightness and accuracy
- Steel 1144 Cold Rolled Rounds
  - Superior machinability
  - Better wear resistance than lower carbon steel
- Steel Cold Rolled Squares
  - General purpose steel
  - Size tolerances more accurate than hot rolled
- Steel Hot Rolled Flats
  - Low carbon steel
  - Designed for structural applications
- Steel Hot Rolled Rounds
  - Low carbon steel
  - Designed for structural applications
- Steel Hot Rolled Squares
  - Low carbon steel
  - Designed for structural applications
- Steel Bar Channels
  - General purpose metal
  - Designed for structural applications
- Steel Equal Leg Angles
  - General purpose metal
  - Designed for structural applications
- Steel Standard Channels
  - General purpose metal
  - Designed for structural applications
- Steel Tees
  - General purpose metal
  - Designed for structural applications
- Unequal Leg Angles
  - General purpose metal
  - Designed for structural applications
- Steel Cold Rolled Sheet and Plate
  - Low carbon steel
  - Better surface finish than hot rolled sheet
- Steel Galvanized Sheet
  - Intended for use where corrosion resistance is required
- Steel Hot Rolled Sheet and Plate
  - Low carbon steel
  - Great for general purpose applications
- Steel Flattened Expanded Metal Sheet
  - For use in decorative and protective applications
  - Material is rolled to flatten strands and bridges
- Steel Floor Plate
  - Low carbon steel
  - Raised lug pattern provides slip resistance
- Steel Perforated Tubing
  - 7/16" holes on 1" centers troughout
  - 1-3/4 and 2 telescope well for adjustability
- Steel Rectangular Tubing
  - High strength-to-weight ratio
  - Flash is removed from the outside of tube, not inside
- Steel Round DOM Tubing
  - Cold drawn tube with inner and outer flash removed
  - More of a precision product than HREW
- Steel Round HREW Tubing
  - Good for structural applications
  - Flash is removed from the outside of tube only
- Steel Square Tubing
  - High strength-to-weight ratio
  - Flash is removed from the outside of tube, not inside
- Steel Structural Pipe
  - Structural purpose pipe
  - Not pressure tested
Aluminum
- Aluminum Angles
  - Most versatile of all of the aluminum products
  - Offers good workability and corrosion resistance
- Aluminum Channels
  - Most versatile of all of the aluminum products
  - Offers good workability and corrosion resistance
- Aluminum Flats
  - Most versatile of all of the aluminum products
  - Offers good workability and corrosion resistance
- Aluminum Pipes
  - Most versatile of all of the aluminum products
  - Not pressure tested
- Aluminum Rectangular Tubing
  - Most versatile of all of the aluminum products
  - Offers good workability and corrosion resistance
- Aluminum Rounds
  - Most versatile of all of the aluminum products
  - Offers good workability and corrosion resistance
- Aluminum Round Tubing
  - Most versatile of all of the aluminum products
  - Offers good workability and corrosion resistance
- Aluminum Squares
  - Most versatile of all of the aluminum products
  - Offers good workability and corrosion resistance
- Aluminum Square Tubing
  - Most versatile of all of the aluminum products
  - Offers good workability and corrosion resistance
- Aluminum 5052 Sheet and Plate
  - Good corrosion resistance
  - Good for marine applications
- Aluminum 6061 Sheet and Plate
  - Most versatile of all of the aluminum products
  - Offers good workability and corrosion resistance
- Aluminum Treadbrite
  - Riased diamond pattern
  - Mirror-like finish
Stainless
- Stainless Angles
  - Most common grade of stainless
  - Excellent corrosion resistance
- Stainless Flats
  - Most common grade of stainless
  - Excellent corrosion resistance
- Stainless 303 Rounds
  - Excellent corrosion resistance
  - Free machining
- Stainless 304 Rounds
  - Most common grade of stainless
  - Excellent corrosion resistance
- Stainless Squares
  - Most common grade of stainless
  - Excellent corrosion resistance
- Stainless Square Tubing
  - Excellent corrosion resistance
  - Outer flash is removed but inner flash remains
- Stainless Polished Sheet and Plate
  - Excellent corrosion resistance
  - Brushed surface finish like new appliances
- Stainless Sheet and Plate
  - Most common grade of stainless
  - Excellent corrosion resistance
Brass
- Brass Flats
  - Most common grade of brass
  - Excellent machinability and corrosion resistance
- Brass Rounds
  - Most common grade of brass
  - Excellent machinability and corrosion resistance
- Brass Squares
  - Most common grade of brass
  - Excellent machinability and corrosion resistance
Specials